11399 Ventura Blvd #2A

Studio City, CA 91604, United States

+1 (323) 876-1862

24/7 Customer Support

Mon - Fri: 9:00 - 17:30

Cable Repair

If you’ve noticed that your garage door is less stable on its tracks or feels harder to lift than it did before, you may be right. As door rollers and hinges age, they become less tight. Greasing the moving parts might help for a little while, but eventually, you’ll have to replace the broken door hardware. If you have any problems, you should call a Cable repair technician who can fix Cable.

Most hinges fall into three main categories. Two roller brackets, one on top and one on the bottom, hold your door in place. Unlike the other door hinges we talked about above, these roller brackets let the door slide horizontally.

A protruding peg is also used to connect the spring cable to the bottom roller bracket.

The top bracket sticks out farther than the other rollers when the door opens. So, the door can move quickly and easily around the curved part of the track without getting stuck. One word of warning before Cable repair experts go on. The bottom bracket can only be taken off if the door is open and the lift wire and spring are taken off.

By letting go of the C-clamps, the door can be opened all the way.

During this Cable repair process, the tension in the lift springs will be released. The “weight” of your door springs is often written in spray paint on one end, making it easy to find. You can see a list of colors like white, red, and yellow. Each color stands for a different door weight, and they should be used that way. Because wooden doors are so heavy, they often use the most significant springs available. Professional cable repairers use doors made of aluminum, the lightest springs they can find, and other lightweight materials.

Take off the cable and spring from the door’s hinge side.

Carefully check the cable pulley for cracks or other signs of wear. The pulley, cable, and spring must be put back in the same way they came out. If you’re not sure, look at the one which you haven’t taken out yet. After the springs have been changed, the door should be opened and shut many times while more lubricant is put on the tracks.